Pines Technology: The Global Leader in Tube & Pipe Bending

Tube & Pipe
Benders

Pines i-Line CNC Benders
CNC 025 (25 mm Capacity)
CNC 040 (40 mm Capacity)
CNC 075 (75 mm Capacity)
CNC 100 (100 mm Capacity)
CNC 150 (150 mm Capacity)

Pines i-Line NC Benders
No. 1 (40 mm Capacity)
No. 2 (75 mm Capacity)
No. 3 (120 mm Capacity)
No. 4 (150 mm Capacity)
No. 6 (219 mm Capacity)

Pines Heavy Duty Hydraulic
Rotary NC Benders
No. 0.75 (40 mm Capacity)
No. 1 (40 mm Capacity)
No. 1.25 (75 mm Capacity)
No. 2 (75 mm Capacity)
No. 4 (150 mm Capacity)
No. 6 (200 mm Capacity)
No. 8 (250 mm Capacity)
No. 10 (300 mm Capacity)

Pines Heavy Duty
CNC Pipe Benders
CNC 060HD (60 mm Capacity)
CNC 090HD (90 mm Capacity)
CNC 115HD (115 mm Capacity)
CNC 170HD (170 mm Capacity)
CNC 250HD (250 mm Capacity)

Pines CNC Tube Benders
CNC 040 (40 mm Capacity)
CNC 075 (75 mm Capacity)
CNC 090 (90 mm Capacity)
CNC 120 (120 mm Capacity)
CNC 150 (150 mm Capacity)
CNC 200 (200 mm Capacity)

Pines Portable Electric
Table Top Benders
CNC 10 Coaxial Cable Bender
CNC 15 CNC Tube Bender

Pines/Gregson
Induction Benders
2"-8" / 2"-10" / 2"-12" / 2"-16"
8"-24" / 10"-30" / 12"-36"
16"-42" / 20"-62"

Pipe Bender Rebuilds
(Models In Stock)

Pipe & Bar
Chamfering Machines

Single End
Pines 660
(Up to 2" [52 mm] Capacity)
Pines i-Line KM 52 AD
(Up to 2" [52 mm] Capacity)
Pines i-Line KM 110 AD
(Up to 4.1" [110 mm] Capacity)
Pines i-Line KM 150 AD
(Up to 6" [150 mm] Capacity)

Double End
Pines i-Line SA
(3" [75 mm] Capacity)
Length Ranges up to 2500 mm

Pines OEM Factory Rebuild:

Two Options:

We regularly procure machine cores for our Factory Rebuild Program through trade-in's, auctions, and used equipment dealers. If we do not have a model in stock we can locate a core usually in a couple of days.

Send your old machine or buy one on the used market and send it to us for remanufacturing.

Download OEM Factory Rebuilds Flyer

Pines OEM Factory Rebuild Procedure:

Steps

1. Assessment – A team of seasoned engineers, mechanics, and electrical tradesmen are assigned to the machine being remanufactured. The team gathers and reviews the machines engineering records kept by Pines since your machines birth (There are over 30,000 hard copy engineering files holding every piece of data and nuance of the specific machine's original build). A review of the machines general condition, any special customer requirements, and new option additions is made and an action plan developed.

Before:	After:
Before:	After:

2. Disassembly – The machine is completely disassembled including brackets, support blocks, and manifold mounting hardware.

Before:

After:

3. Shot Blasting – The machine is shot blasted, primed, and painted to the color of your choice.

Before:

After:

4. Hydraulic – All hydraulic components are rebuilt or replaced (manifolds, valves, plumbing).

Before:

After:

5. Machine Base – The tank assembly is inspected for leaks and repaired as necessary. New mounting hardware (Electrical standoffs, manifold brackets etc), pump, motor and pump bell housing are installed.

Before:

After:

6. Stationary & Swing Arm Remanufacture – While the tank assembly is being repaired, the swing and stationary arms are being inspected and repaired as required on OEM Factory fixtures.

Before:

After:

7. Machine Control – A new Pines control system is built in tandem as the other processes are being performed. New disconnect box, new control box, new control stand. The machine is brought up to the current level safety standards.

Before:

After:

8. Re-assembly – The new and remanufactured parts are delivered to the assembly floor. The same skilled technicians that build the new tube benders perform the re-assembly process.

Before:

After:

9. Inspection & Test – After assembly is complete, a 5 hour run test, 10 bend repeatability test, and 3 inspections are conducted. The same procedure used for new machines.

Before:

After:

10. Service Department Sign Off – The machine does not leave the Pines Technology facility until all requirements are met.

TOP

Tube & Pipe
Bending Tooling

Tooling
Tooling - Competitive Machines
Stocked Mandrel Components

OEM Machine
Control Upgrades

NC & CNC Controls
Pines TS2000 CNC Control

Services

Leasing
Service Contracts
Trade Ins
Rebuild Services
Phone Support
Field Service & Charges
Replacement Parts
Legacy Machines

Vendors

Terms & Conditions
Conditions of Sale
Tax Exempt

Employment

Job Opportunities

HOME l ABOUT US l APPLICATIONS l LITERATURE l VIDEOS l NEWS l CONTACT US l PRIVACY POLICY l TERMS & CONDITIONS